JAN 2015 – THIS PRODUCT IS NO LONGER SOLD. IF YOU ARE STILL INTERESTED DROP ME A MAIL.
AVR Development Board
Low Cost AVR Development Board – ATmega16 / ATmega32 – v4.1
28 April 2011 – Prices updated
Board Features :
-
supports : mega16A/32A AVR uC. With easy to use ZIF socket.
-
Pins headers are provided for all ports of uC, so that any signal can be tapped and board’s functionality can be extended.
-
slot for crystal, so it can be changed. Default crystal 16MHz.
-
LCD connector on PORTB with contrast control pot. 8 LEDs are also connected on PORTB for debugging purpose.
-
On Board TSOP 1738 on PORTC.6, thus one can use remote control and get benefit of 30keys at the expense of single microcontroller pin.
-
MAX232 provided for serial interface with PC.
-
Two L293D motor driver ICs. Each one has 4 H bridges and capacity of 500mA per bridge. This can be used for driving 4 DC motors or 2 Stepper motor.
-
One of the two L293D IC, is connected to PWM out pins (OC1A,OC1B). This can be used for motor control using PWM.
-
Separate voltage regulator is provided for L293D. This helps you to provide any customary voltage to load.
-
6 Voltage dividers for 6 ADC inputs. Helps you to measure almost any voltage levels even in excess of 5V. Best for robotics infra-red sensors.
-
4 Tact switches(buttons) for user input.
-
One Speaker for audio generation. By default connected on PORTC.6, but jumper can be opened and then speaker can be connected to any other pin using external wire.
-
SPI bus connector with on board 3.3V supply generation. So that you can easily interface MMC/SD cards / flash memories or any other SPI device to uC.
-
Supports In System Programming (ISP) using cable provided. PonyProg2000 can be used for burning programs into uC.
-
NO SMD COMPONENTS. So that you can replace any component on the board with your desired ones.
-
Dimensions : 9.6cm x 12.6 cm
Board Accessories:
-
In System Programming cable. Connects to printer port of PC.
-
Serial cable, to connect to SERIAL port of PC.
FREE CD:
Contains…
– Evaluation version of CodeVisionAVR C compiler.(Supports upto 2KB of hex code).
– WinAVR Compiler
– Eclipse IDE with WinAVR plug-in
– PonyProg2000. For burning your hex files into microcontroller.
– Easy to understand and well commented sample programs.
– Datasheets of all components.
– Other useful resources like ATMEL’s application notes, etc.
USES :
- Best for project development.
- Best for autonomous robotics.
- For embedded system product development. In ready to ship projects, blank PCB can be ordered and only required components can be soldered.
PRICING:
UPDATE : 22 Dec 2010 :
Due to recent increase in electronics component prices and manufacturing costs, I have to increase the prices to sustain the activity. Still today, these boards are the cheapest ones compared to features and prices of other similar products.
** Board with custom combination of components, other than mentioned in above list, are also available.
* For board with ATmega32, add 50/- to above cost.
^ 10% or more, discount on the regular price will be given for students depending on the order quantity.
NOTE :
– Shipping and handling charges will be from Rs. 90 to Rs. 150 depending on the location within India.
– Tutorials for C programming for AVR are not provided. However many sample programs are provided. They are easy to understand and self explanatory.
How to Buy :
- Drop me a mail at elecrom [a t] gmail [ d o t ] c o m
Snaps :
Protected under Creative Commons – Attribution Non-Commercial No Derivatives Works 2.5:
(Link for only Indian version of the license is given. If you are not from India, kindly refer to legal code of the license of respective country)